impedance matching

DIs do not perform impedance matching.

药品交互作用不执行阻抗匹配.

Higher mode characteristics and impedance matching problem of ridged waveguides

背脊波导移相器高次模特性及阻抗匹配问题

The Unequiripple Function Type Impedance Matching Network for Microwave Transistor or FET Chip

微波晶体管、场效应管管芯的不等波纹函数型阻抗匹配网络

Image signal, after compressing process, is modulated, amplified, isolated, and transmitted to the ground through 3000m single armored cable. It is, then, extracted through impedance matching and demodulating.

压缩处理后的图像信号经过调制、放大、隔离，由3000m单芯铠装电缆传输到地面，在地面进行阻抗匹配和解调提取信号。

This paper talks about impedance matching algorithm of liquid stub tuner, and makes a thorough analysis about it. By making a rough sketch of two representative examples with Matlab, this paper verifies the correctness of the algorithm.

本文给出了液调配器的阻抗匹配算法，对算法进行深入的分析与研究，且给出两个典型实例，通过Matlab绘图对该算法进行了正确性验证。

Study of liquid impedance matching for ICRF on the EAST tokamak

EAST装置离子回旋加热液态阻抗匹配系统的研究

Series termination is an impedance matching technology in the source end which allows the receiver to receive integral signal.

串行端接是一种在源端进行阻抗匹配的端接技术，使得接收器可以收到完整的信号电压。

The parallel double transmission line, printed on the both sides of the substrate is utilized as feed line, and a tapered transmission line is employed for impedance matching.

采用印制在介质板双面的平行双线传输线对天线阵列进行馈电，输入端使用渐变传输线进行阻抗匹配。

In this paper a new impedance matching network design method is introduced and is compared with the traditional tunning network method.

本文介绍了一种新的阻抗匹配网络设计方法，并与传统的调谐网络设计法作了比较。

A solution of adaption impedance matching for power line communication system

一种电力线载波通信自适应阻抗匹配方案

A study on the impedance matching of the circular waveguide latching ferrite variable polarizer

圆波导铁氧体锁式变极化器的阻抗匹配研究

Because it has many functions such as Impedance matching and amplitude detecting, the system has high electroacoustic transformation efficiency, low heat and rapid cutting ability.

具有阻抗匹配和振幅检测等多项功能，电声转换效率高，发热少，切割速度快。

The ortho-mode transducer adopts the design idea of square waveguide stepped impedance matching and waveguide slot coupling.

正交模转换器采用方波导阶梯阻抗匹配与波导缝隙耦合的设计思想。

The synthesis procedure of the unequiripple function type impedance matching networks is given for the RC series and parallel load.

从微波晶体管、场效应管管芯的单向化模型出发，给出了对微波宽带放大器的不等波纹函数型阻抗匹配网络综合方法。

Design and implementation of impedance matching device in Medium-voltage carrier communication network

中压载波通信中阻抗匹配器的设计与实现

In this paper, the on-state impedance matching formulation of MEMS switches is developed based on the results of the high-frequency transmission line, and the electromagnetic characteristics of MEMS switches are confirmed by using the HFSS software.

本文在高频传输线研究的基础上，推导出微机械开关的开态阻抗匹配模型，并利用HFSS软件对开关的高频特性进行模拟。

Study on the Impedance Matching Design of Planar Slot Antenna

平板裂缝天线阻抗匹配设计的研究

The Al-Cu impedance matching test was fully success. These results are close to the experimental fitting curves ( including the data of underground nuclear explosions) published by Nellis in 1988.

铝铜阻抗匹配实验取得了成功，得到的铜的高压冲击压缩数据与Nellis等人1988年发表的实验结果（包含地下核爆实验结果）拟合曲线非常接近。

In terms of concept of radio highfrequency antenna impedance matching and analyzing design of energy converter of the brain disease curing device, a engineering method of designing the supersonic-wave power output transducer are given and precautions are shown finally in this paper.

本文借助无线电高频天线阻抗匹配的概念，通过对脑病治疗机换能器设计的分析讨论，给出了超声波功率输出换能器工程设计的方法及应注意的几个问题。

An Adaptive Impedance Matching System Model for Power Line Communication System

电力线载波通信中的自适应阻抗匹配系统模型

The antenna was optimized in order to wide bandwidth and impedance matching.

为实现展宽频带、阻抗匹配等要求,对该移动终端天线进行了优化设计.

Impedance matching between waveguide and slow-wave structure is significant for performances of travelling wave tube.

在行波管整管性能中,波导与慢波结构的阻抗匹配具有关键作用.

Surface treatment then was carried out to get better impedance matching composite material.

通过进行表面ZnO处理后再进行氢气还原的方式，得到了阻抗匹配较好的一种复合材料。

Application of Simulated Annealing Algorithm in Automatic Impedance Matching System

模拟退火算法在自动阻抗匹配器中的应用研究

On Impedance Matching between Megaphone and Horn

再论扩音机与喇叭的阻抗匹配

Abstract: The design method of impedance matching for planar slot antenna is discussed in this paper.

文摘：本文对平板裂缝天线阻抗匹配设计方法进行了讨论。

This article will introduce design theory, theoretical arithmetic of Characteristic Impedance and strict impedance controlling. These are used to ensure impedance matching and achieve PCB reliability to make the product be in a steady state.

本文从多层PCB板叠层的设计原理、特性阻抗的计算方法、严格的阻抗控制，来保证阻抗匹配，实现PCB的可靠性，使产品稳定的工作。

The research for impedance matching algorithm of liquid stub tuner

关于液调配器的阻抗匹配算法的研究